The toilet is the most used utility in a home. You are sure to use this as much as you might use your chair if I should say. It is not unusual that you will need to occasionally either replace it or even do a repair. If you have a dated toilet, you do not have to be told about how difficult it is to keep clean. You can certainly upgrade the look of your bathroom if you can install a new toilet.
However, it is easy to say you can renew your bathroom with a simple replacement of toilet but it is not so easy as neither of us has done it several times in our life. Not a big deal when it comes to installing your toilet as far as I could learn, but if you are talking about plumbing it could prove a herculean task. You can rest assured that this task is not a tough task at all.
Most toilets have a standard flange underneath so that virtually any size or style will fit where your old toilet sits now. The first thing you will want to do is remove the water supply from your old toilet at the tank, making sure that the valve is tightly closed first, of course. Turn the valve non-to the right and then loosen those from the bottom of the tank. Is a good idea to turn off the water and flush the toilet to allow most of the water to drain away. You’ll want to have a large bowl for the remainder as well as a few towels for anything you can’t catch.
Next, remove the two nuts on the posts at the base of the toilet. If your toilet has been clear for some time this can actually be a little difficult. You will need a pair of pliers so that you can get a good grip on the nut. Once you have removed the fasteners from their posts all that is left to do is lift the old toilet straight up and over the posts. It’s best to have one person on each side of the toilet and a clear path to carry it all the way outside as soon as you lift it from the floor. There will always be just a little water left, but that’s what the towels are for.
Now that there is only a hole where your old toilet was, you will notice a plastic or rubber cone with some gunk on it. The gunk is actually wax, and you will need to scrape all of the excesses. It’s not a bad idea to replace the code entirely as well as removing the old posts to replace them with new ones as well almost any hardware store will have posts kits and wax rings with or without the cone assembly to make the installation of the new toilet simple.
All that’s left is to put the new post and phones into position and lower the new toilet into place. I can, it certainly helps to have two people and maybe even a third to make sure that the posts slide smoothly into the holes in the base of the toilet. Once the toilet is in place you merely need to rock it gently onto the wax ring to seal the underneath side orifice. Now, some read the new nuts and washers onto the posts and tightened them to finish the job. Don’t crack down too hard, because you can easily crack the porcelain.
Yes, your floor is an even your new toilet many have a bit of rock to it which you can easily fix with a couple of shims in the right spots. To really complete the installation is also a good idea to run a bead of caulk around the bottom age where the toilet needs the floor. Be sure to reconnect your water supply and give your installation a few good flushes to make sure that you have gotten a good seal from your wax ring.
So you know the basics of installing a toilet yourself. Do you have the same feeling as when you started reading this? Obviously not is your answer as we have got some handy tips to do the job confidently. You are now all set to lower your new toilet into the correct slot and put some proper waxing as well. With a little help and tips, everyone can successfully install a toilet now!
Upgrade the Look of Your Bathroom if You Can Install a New Toilet.
